Euromix™ Fine Coat
Euromix™ Fine Coat is a premixed, 100% fully acrylic polymer-based texture coating, designed for decorative finishing over Euromix™ Renders and other substrates.
Product Summary
Euromix™ Fine Coat is a premium quality, fine build acrylic texture coating that is formulated to provide an attractive finish on suitable substrates. Designed to provide superior flexibility, crack resistance, strong adhesion, and water repellency with the addition of Euromix™ Hydroshield.
The typical grain size (the aggregate used to achieve the textured finish) for Euromix™ Fine coat is @ 0.4mm diameter.
Euromix™ Fine coat is applied by trowel or spray over suitably primed substrates. It provides a decorative and protective coating with a subtle sparkle to its finish over the surface. Euromix™ Fine coat can be pigmented (tinted) to achieve a desired colour.
Application
Thoroughly stir the Euromix™ Fine Coat in the bucket, using a power stirrer prior to application. The Fine Coat is trowelled onto the substrate to a thickness determined by the coarsest particles in the material, then finished with a plastic finishing trowel applied in a circular motion to achieve an even textures appearance.
It is imperative that a 'wet edge' is maintained at all times and that the material is not over worked as this will likely result in patchiness and joint lines showing in the coating. Ensure that there is sufficient trowel hands available on large areas.
Important Information
Euromix™ Fine Coat Texture cannot be applied directly over PVC, polystyrene (EPS), AAC or other absorbent materials without the application of a suitable base coat first. Euromix™ recommends the use of Euromix™ Acrylic Primer as the priming coat with Euromix™ Fine coat.
©2021 Euromix. All rights reserved | Terms of Service | Privacy Policy